Autopage RF-303 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автосигналізація Autopage RF-303. Autopage RF-303 18 сторінок.

3. Turn the ignition switch "ON/OFF", "ON/OFF". The vehicle horn, or siren

will chirp again, one (1) time. You are now in the programming mode.

4. Press the ON/OFF button on one of the remote transmitters until the vehicle

horn, or siren responds with a confirming chirp. The first transmitter is now

programmed.

5. Within five (5) seconds, press the ON/OFF button on the second transmitter

until the vehicle horn, or siren responds with a confirming chirp. The second

transmitter is now programmed.

NOTE: If the RF-303 does not receive a second transmitter code to learn

within five (5) seconds, it will automatically close the programming mode and

resume normal alarm functions. If this happens, it will be necessary to repeat

steps 1 through 5 and reprogram all transmitters.

NOTE: The RF-303 can learn up to four transmitter codes. If additional,

optional transmitters are to be programmed, follow sequence 1 through 5 and

continue programming.

L. PROGRAMMING THE REMOTE TRANSMITTERS FOR A

SECOND VEHICLE.