Autopage Telematics and Tracking Module Посібник з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автосигналізація Autopage Telematics and Tracking Module. Autopage Telematics and Tracking Module 16 сторінок. Telematics and tracking module
Також для Autopage Telematics and Tracking Module: Посібник з монтажу (8 сторінок)
Друкувати сторінкуApplications".
Once the C|3 application is downloaded to your phone it should appear
in the list of applications in this menu. Some phones allow you to assign
'Soft Keys' to certain applications via the setup or customization menus.
For example, the C|3 application can be setup to start by selecting the
Right or Left 'Soft Key' on your phone. Once you have found the
application in the menu, it can be launched as any other application, by
scrolling to the application name and selecting 'OK', or 'Select'.
3.2
Selecting Functions Using Your Phone Controls
There are several different methods of controlling the functions of C|3,
depending on the capabilities of your phone.
•
Most modern cellular phones have navigation keys (up, down,
left, right) as well as an 'OK' or select button. These navigation keys can
be used to highlight and select icons within C|3 application. Refer to
Figure 3.2.1 for an example of what your navigation keys may look like.
•
Another method of selecting icons and executing functions within
the C|3 application is to utilize the alphanumeric keypad (number
buttons) on your cell phone. Refer to Figure 3.2.1 for an example of how
to execute functions using these keys.
Certain Windows Mobile devices have touch screens. You can
execute C|3 functions by touching the associated icons on the screen
with the stylus (or your finger).
If you have an iPhone then you are using the web based version
of C|3. All of the multi-touch features of your web browser function
exactly as they normally do. You can zoom in or out or touch the icons
on the screen to execute functions with your iPhone.
•
Lastly, you can activate "Short Cut Keys" within C|3 by selecting
the "Enable Shortcuts" option from the C|3 main menu. These shortcuts