Autopage MA-200 Посібник з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Система безпеки Autopage MA-200. Autopage MA-200 13 сторінок. 2-way remote control motorcycle alarm
Також для Autopage MA-200: Інструкція з монтажу Посібник з монтажу (8 сторінок)

Друкувати сторінку

(ie.0:30).....and so on.

3. Leave the buttons starting count down then

Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2

hours maximum.

2.When the count down timer is showing 0:00 the timer has elapsed.

3. Press

button for real time indication when the timer is counting down.

10. Out Of Range Indication:

The system will automatically check the range every 30 minutes when armed.

1. If the user is within the range, the

2. If the user is out of range, it has five short "bi" sounds and the

screen.

Note: Programming "Out Of Range Indication" will decrease the life expectancy of battery.

D. TIMER SETTING:

Transceiver Button

Press & Hold the

button for 3 seconds

Press the

button once

Press the

button once.

Press the

button once

Press the

button once

Press the

button once

Press the

button once

Press the

button once

EXIT: Press and hold the

button for 2 seconds or leave it for 10seconds, the system will exit the

programming mode.

1. Timer Setting: Example to AM10:30

1. Press & hold the

button for 3 seconds, with two-melody sound the "Hours" digit will flash for

adjusting.

2. Press the

button to decrease or increase the "Hour" digit until AM10:xx

3. Press the

button once again then the "Minute" digit flashes for adjusting.

4..Press the

button to decrease or increase the "Minutes" digit until AM 10:30

5. Press the

button for 2 seconds with one-melody sound will confirm exit of the timer program mode.

2. Alert Alarm Timer Setting: Example to PM 6:30

1. Press & hold the

button for 3 seconds, two-melody sound and the "Hours" digit will flash for

adjusting.

2. Press the

button twice, the LCD screen will shows

adjusting.

3. Press the

button to decrease or increase the "Hour" digit until PM 6:xx

4. Press the

button once again then the "Minutes" digit flashes for adjusting.

5. Press the

button to decrease or increase the "Minutes" digit until PM 6:30

6. Press the

button once again then

7. Press the

button to start the "Alert Alarm Timer", and the "ON" icon will show on the LCD screen.

Press the

button to stop the "Alert Alarm Timer", and the "OFF" icon will show on the LCD screen.

8. Press

button for 2 seconds with one-melody sound to confirm exit the timer program mode.

3. Count Down Timer Setting: Example Set count down timer at 2:30

1. Press & hold the

button for 3 seconds, with two-melody sound the "Hours" digit will flash for

adjusting.

2. Press the

button 5 times, the LCD screen will shows

adjusting.

MA-200 OP REV.A

icon flashes

icon will display on the LCD screen.

Description

Timer Setting (Hour)

*Flash digit for adjusting

Time setting (Minute)

*Flash digit for adjusting

Alert Alarm Time Setting (Hour)

*Flash digit for adjusting

Alert Alarm Time Setting (Minute)

*Flash digit for adjusting

Alert Alarm Setting ON / OFF

Count Down Timer Setting (Hour)

*Flash digit for adjusting

(Max.19 hours 59 minutes)

Count down Timer Setting (Minute)

*Flash digit for adjusting

Count down Timer Setting ON / OFF

icon and "Hours" digit will flash for

icon flashes for alert alarm "ON / OFF" setting

icon and "Hours" digit is flashing for

Oct/23/2006

icon will disappear on the LCD

Press Transceiver Button

–

for

and

for

–

for

and

for

–

for

and

for

–

for

and

for

OFF

for

and

for

–

for

and

for

–

for

and

for

OFF

for

and

for