High tech health CBV3 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Масаж High tech health CBV3. High tech health CBV3 9 сторінок.
Друкувати сторінку
technical Specifications
NAME OF PRODUCT
Circulation Booster
MODEL
CBV
FREQUENCY
1Hz – 0Hz
OUTPUT CURRENT
Max 9mA
WEIGHT
1.kg
DIMENSION
(W)(H)x8(D)(mm)
POWER CONSUMPTION
W
AC ADAPTOR
CE Approved
POWER SOURCE
INPUT (ADAPTOR USED)
100-0V AC, 0-0H
OUTPUT
v DC, 1000mA
How to use the remote control
The remote control allows you to sit back and relax
without having to bend over to operate the device.
It is important to always aim the remote control
towards the LCD display on the device as this is
where the IR receiver is located.
The buttons are quite self explanatory and match the
buttons on the device as explained in earlier sections of
the user's manual. A "mute" button however has been
added to stop the beeping of the device as it progresses
automatically through the programmes.
personalised setting
1. The device is pre-set to run for 0 minutes and rotate
through a series of beneficial programmes each minute.
2. To alter the time duration of the treatment, use the
'+' or '-' buttons next to 'TIME' on the device control
panel or remote control.
3. If during treatment a particular programme is preferred,
you can choose to keep that programme constantly running
by pressing off the 'AUTO' button on the device or remote
control. However, we recommend keeping the auto button
on for optimal results and to avoid over-stimulation of
particular muscles.
10
frequently asked Questions
Q: Does the device vibrate?
a: The Circulation Booster
device
®
is not a foot massager and does
not vibrate. Instead it sends mild
electrical impulses to stimulate the
nerves of your soles which contract
and relax your calf muscles. When
your bare feet are placed on separate
foot pads at the same time, your body
creates the circuit between the left
and right foot pad and the stimulation
will commence.
Q: What intensity level should i use?
a: Everyone is different and will react
differently to the intensity level
settings (e.g. someone may feel
the stimulation on setting 1 while
others on setting 0 or higher). It is
advisable to start off on a low setting
and work up slowly until you can
feel the mild electrical impulses
in your feet and the muscles in the
calf visibly pulsing or twitching but
at a level that is not uncomfortable.
If your feet lift off the device or
your legs ache after use, you have
probably had the intensity level on too
high a setting. Rest the legs and next
time use a lower intensity level.
Visit our website for accessories and great innovative health products
Q: the stimulation is stronger in
one foot than the other. is there
something wrong with the foot pad?
a: The intensity output in both foot pads
is exactly the same. However, both
feet and legs are never exactly the
same and the nerves in one foot or
leg may be more sensitive than the
other. Set the intensity to a level that
is comfortable in the good (or more
sensitive) foot. The other foot will still
be receiving the therapy despite the
lack of sensation.
Q: My foot is too small / big for the foot
pad. Does this matter?
a: No, this is not a problem. Just ensure
that as much of the soles of both
your bare feet are touching the foot
pads so you will be able to create the
circuit and have a therapy.
Q: previously i could feel the
stimulation on a much lower
intensity but now i have to increase
the intensity a lot more. is there
something wrong with my machine?
a: No, nothing has changed with the
output of your machine. It is common
that with regular use you will be able
to comfortably increase the intensity.
The device has a broad intensity
range (1 – 99) and everyone should
feel the stimulation in this range
if used correctly. Dehydration,
cold or dry skin can also affect
the intensity. Ensure you are well
hydrated with water and use a
liberal amount of heel balm on
your feet to improve conductivity.
11