High Tech Pet BE-500 Посібник з монтажу та експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Засіб для догляду за домашніми тваринами High Tech Pet BE-500. High Tech Pet BE-500 17 сторінок. Wire and flag kit
Друкувати сторінку
BOUNDARY WIRE
Even the boundary wire used on your X-30, HC-8000, HC-7000
or X-10 system is unique. The copper alloy wire and insulating
coating are all made specially to our custom specifications. We
have designed it to be an efficient radio frequency broadcast
conductor, with a mechanically strong core and an extra thick,
extra tough, outdoor grade insulation that resists sunlight and
moisture.
STEP BY STEP INSTALLATION
STEP 1: Plan Your System Layout
This is the most important step. Be sure to take the time to
plan carefully. This will avoid time consuming corrections to
your installation. Before beginning installation of your
system, we recommend you make an aerial sketch of your
yard such as the one shown in Figure 6. Your sketch should
include all buildings, large plants, trees, walks, driveway,
pool, and other important details. Then sketch in where you
plan to place the boundary wire. Make sure the wire makes
a continuous loop.
SAFETY TIP:
Since you will only be burying the cable 4 inches deep at
maximum, it is unlikely that you will disturb power or
phone lines. Still, we recommend that you contact your utility
companies to find out the location of all buried wires, mark
them on your sketch and avoid running the boundary
cable in these areas.