AutoPets Litter-Robot 3 Посібник з монтажу
Переглянути онлайн або завантажити pdf Посібник з монтажу для Засіб для догляду за домашніми тваринами AutoPets Litter-Robot 3. AutoPets Litter-Robot 3 8 сторінок. Carbon filter and seal strip installation
Друкувати сторінкуThe Litter-Robot 3 is equipped with a Carbon Filter for absorbing
odors and controlling moisture in the Waste Drawer. The flexible
filter pad can be removed and replaced when cleaning the drawer.
For optimal odor control, we recommend changing the filter every
three months. If you use scented litter, change the filter more
frequently, as it will also absorb the fragrance.
Replacement Carbon Filters can be ordered at www.litter-robot.com.
i
nstallation
Removal:
1. Pull out the Waste Drawer and locate the
Carbon Filter in the front wall.
2. Push the top edge of the filter downward to free
it from the hooks.
3. Pull the filter out of the slot and discard.
Installation:
1. In the front wall of the Waste Drawer, slide the
new filter into the slot.
2. Bend the top edge of the filter and slide it under
each hook.
3. Adjust the filter, so it covers the front-facing
vent completely.
Note: It is normal for the Carbon Filter to shed
during installation. Simply wipe up or vacuum
any debris.
C
F
arbon
ilter
Visit www.litter-robot.com for installation videos.
Headquarters
1080 W Entrance Dr
Auburn Hills, MI 48326
LR3-8155
i
G
nstallation
Properly installed Carbon Filter
Assembly
Contact Customer Service
561 S Fairfield Ave
Monday - Friday, 9am - 5pm EST
Juneau, WI 53039
1-877-250-7729 or [email protected]
uide
Hooks
Slot