High-End Technology F16 Інструкція з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Іграшка High-End Technology F16. High-End Technology F16 18 сторінок. High-end technology f16 for electric ducted fan
Друкувати сторінкуDon't get confused about the pictures in the pictures used in this manual we
use 2 versions of the F-16 the Thunderbird version and the white version which
we laid out ad the red/white and blue demo version.
Fit the hardwood wing joiner in the fuselage and wing and see if the wing fist nicely.
Start by gluing one wing panel with 5 or 30 minute epoxy. First apply some epoxy
inside the wing joiner slot in the fuselage. Press the wing joiner inside the fuselage.
Remove excess epoxy. Now apply epoxy in the wing joiner slot in the wing root and
also apply epoxy on the wing root. Slide the wing over the hard wood wing joiner and
press the wing against the fuselage. Make the leading- and trailing edge align with
the fuselage. Remove the excess epoxy with a clean cloth and cleaning alcohol.
When the epoxy has cured you can do the other wing panel the same way.
After the wings the wings are glued one. It is possible to cover the joint between the
fuselage and wings with a 3-4 mm wide white trim. (Oracover).