Actonis DUAL ACTION 18 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Засоби особистої гігієни Actonis DUAL ACTION 18. Actonis DUAL ACTION 18 17 сторінок.
Також для Actonis DUAL ACTION 18: Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

After drop/shock, that may cause changes in the performance, please

contact customer service.

Be careful, do not put the power cord around your neck, it may cause

strangulation.

Keep the device out of the reach of children/pets to avoid inhalation or

swallowing of small parts.

Do not use the device if it is damaged in any way. The continuous use of a

damaged unit may cause injury, improper results, or serious danger.

The device should be used only with the accessories recommended for use

by the manufacturer.

When not in use, store the device with the adapter in a dry room and protect

it against extreme moisture, heat, lint, dust and direct sunlight. Never place

any heavy objects on the storage case.

ELECTROMAGNETIC EMISSIONS GUIDANCE

Guidance and manufacturer's declaration – electromagnetic emissions

The LaserComb intended for use in the electromagnetic environment specified

below. The customer or the user of the LaserComb should assure that it is used

in such an environment.

Emission test

RF emissions CISPR 11

Harmonic emissions IEC 61000-3-2

Voltage fluctuations/flicker emissions

IEC 61000-3-3

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) the device

must accept any interference received, including interference that may cause undesired

operation.

LUH018DWEDXXX-00-0723.indd 10

Compliance

Group 1

The LaserComb use RF energy only for its

internal function. Therefore, its RF emissions

are very low and are not likely to cause any

interference in nearby electronic equipment.

Class B

The LaserComb is suitable for use in

all establishments, including domestic

Class A

establishments and those directly

connected to the public low-voltage power

Compliance

supply network that supplies buildings used

for domestic purposes.

Electromagnetic

environment-guidance

7/18/23 1:53 PM