Afinia H400PLUS Посібник із швидкого старту - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для 3D-принтери Afinia H400PLUS. Afinia H400PLUS 12 сторінок.

Друкувати сторінку
6\
Gently push the filament into the
filament entrance and down until it stops.
After reaching the print temperature,
the printer will beep and start extruding
filament.
8\
Close the top covers and doors.
Filament
extrusion
7\
Push the guiding tube into the filament
entrance and insert the tube into the holding
clip on the mount.
9\
Please note that the external spool holder
can only be placed at the following positions.
other locations could adversely affect printing
printing performance.
Top View
20cm
10cm
lock the guidng tube at the
tube holder
Insert guiding
tube into the
filament
entrance
Guiding tube
10cm
5