ACTOP LSIV3506 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Домофонна система ACTOP LSIV3506. ACTOP LSIV3506 5 сторінок. Intelligent door peephole viewer
Друкувати сторінкуFunction explanation
Intelligent doorbell function
1. When guests approach the door, the doorbell button lights, tell guests to press it; When
guests leave the monitor area, the light goes out.
2. If the guest presses the button, the doorbell rings.， and the panel show the guest and take
a photo.
3.1 After the ring, if there is no answer (the ring time can be stetted), the doorbell will say:
"Hello, I am not at home, please leave a message after beep ring the doorbell, thank you! ".
3.2 Within 5 seconds if guests press the button again, the doorbell beeps, then records the
video message (the video last for 10 seconds defaulted).
3.3 After the video message, the doorbell will say: "If you are in a hurry to find me, please
ring the doorbell again to call my phone, thank you!" Within 5 seconds if guests press the
button again, the doorbell will call the host (dials the pre-set number), put through, guests
can speak with the host via the doorbell.
Intelligent security function
1. If guests stay before the door for more than 3 seconds without pressing the doorbell
button, the indoor button will light and flicker, warning there are guests out of the door.
2. MMS is against illegal visitor behavior: If guest stay before the door for more than
15seconds (the time can be stetted) without pressing the doorbell button, the viewer will
take photo for the guest, and store it into the T-card and send a MMS alarm to the host (can
be chosen to use or not) and the alarm sounds at the same time (can be chosen to use or
not).
3. When guest presses the doorbell button, the viewer takes photo and stores it, the indoor
bell rings at the same time; the indoor screen lights, shows the guest outdoor.
Communication function
If urgent, Guests can press the doorbell button to remote call with the host.