DCS 48" Professional Grill OGP48in Технічні характеристики - Сторінка 2

Переглянути онлайн або завантажити pdf Технічні характеристики для гриль DCS 48" Professional Grill OGP48in. DCS 48" Professional Grill OGP48in 2 сторінки. 48” professional grill

Друкувати сторінку
DCS 48
IGNITION
BGB48-BQAR
48" Grill Dimensions
Grill Model: BGB48-BQAR
Cart Model: CAD-48
48" Grill Dimensions
Grill Model: BGB48-BQR
Cart Model: CAD-48
MODEL NUMBER
TOTAL COOKING AREA
PRIMARY COOKING AREA
(GRILL AREA)
SECONDARY COOKING AREA
(WARMING RACK)
TWO SIDE BURNERS
GRILL BURNERS
INTEGRATED SIDE BURNERS
INTEGRATED ROTISSERIE BURNER
SMOKER BURNER
DOUBLE-SIDED GRILL GRATES
GREASE MANAGEMENT SYSTEM
®
SHIPPING WEIGHT
(GRILL HEAD)
SHIPPING WEIGHT
(OPTIONAL CART)
SHIPPING DIMENSIONS
(HEIGHT X WIDTH X DEPTH)
IGNITION
(with optional grill cart)
(with optional grill cart)
BGB48-BQAR
BGB48-BQR
1167 SQ. INCHES
1123 SQ. INCHES
840 SQ. INCHES
638 SQ. INCHES
327 SQ. INCHES
241 SQ. INCHES
244 SQ. INCHES
4 @ 25,000 BTU/HR
3 @ 25,000 BTU/HR
2 @17,000 BTU/HR
18,000 BTU/HR
14,000 BTU/HR
3,500 BTU/HR
3,500 BTU/HR
304 GRADE STAINLESS STEEL
304 GRADE STAINLESS STEEL
365 LBS.
345 LBS
190 LBS.
190 LBS.
32" X 52" X 31-1/2"
32" X 52" X 31-1/2"
BGB48-BQR
48" Grill Island Preparation
Grill Models: BGB48-BQAR/BGB48-BQR
3" to non-combustible
construction/min. for lid
clearance
12" min. combustible
construction
Vent
Max.
* Standard cut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
Island installation to use minimum of 3 vents providing
10 square inches per vent (typical)
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 4" W.C.
• Supply Pressure: 6" to 9" W.C.
Propane
• 1/2" NPT male with a 3/8" flare adapter
• LP hose with a quick disconnect & fitting are shipped
connected
• Operational Pressure: 10" W.C.
• Supply Pressure: 11" to 14" W.C.
Power Requirements:
• 120V 60Hz for models with Rotisserie Motor.
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Grill Placement:
DO NOT build grill under overhead unprotected combustible
construction. Use only in well-ventilated areas. These units are
for outdoor use only. If located in a consistently windy area
(oceanfront, mountaintop, etc.) a wind break will be required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your
dealer.
Accessories
• Stainless Steel Grill Cart (CAD-48)
• Single or double side burners for built-in application
• Stainless Steel Access Doors for built-in application
• Stainless Steel Access Drawers for built-in application
• Insulated Jacket for built-in application
• Grilling Tool Set
• Brazilian Cherry Chopping Board that fits in cart side-shelf
• Drop-on Griddle Plate
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
We encourage you to find out more about these features and learn how they
can make your cooking experience more enjoyable by visiting our learning
page at: www.dcsappliances.com.
Because of continuing product improvement these specifications are subject
to change without notice.
Note: Locate electrical
service on the right hand
side for rotisserie motor
connection.
4" x 4" opening for
Vent
gas supply line
Vent
access doors
(ADN20x48)
access drawer
(ADR 48)
Summer 2008
37