Afinia 3D H400+ Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для 3D-принтери Afinia 3D H400+. Afinia 3D H400+ 6 сторінок.
Друкувати сторінкуNetwork Setup
The H400+ can be connected to your network either via ethernet or Wi-Fi.
For ethernet connection, follow instructions 1, 2, 3.
For Wi-Fi connections, follow instructions 1, 2, 4, 5, 6.
Click the "Config" button.
Plug the network cable into the back of
the machine. If the printer successfully
connects to the network, the ethernet
connection icon will appear on the top
right of the status bar as shown below.
Input the Wi-Fi password, then press
Return.
Click the
button.
To use a WiFi connection, toggle the
WiFi option to ON, and choose the Wi-Fi
network that your computer is connected to.
If the printer is successfuly connected
to the Wi-Fi network, the Wi-Fi connection
icon will appear in the top right of the status
bar as shown below.
Load and Print 3D Models
1\
Connect the printer to the computer
via USB, ethernet or Wi-Fi.
3\
Use the adjustment wheel to setup
the print job.
5\
Slicing and data tramission progress
will be shown on the status bar.
2\
Click the "Build" button at the main
menu to enter the print setup interface, click
"+" button to load a file (image or STL/UP3 file).
Build
4\
Click "Print".
6\
When the data transmission completes,
the amount of time and material needed for the
print job will be shown. After this point, the user
can safely disconnect from the printer.
7