Galleon SIGNALCLOCK V2 Посібник з встановлення та експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Годинник Galleon SIGNALCLOCK V2. Galleon SIGNALCLOCK V2 19 сторінок.
Друкувати сторінкуDAYLIGHT SAVING TIME
By default, the clock will not have daylight saving time (DST) enabled. You will need to enter the
DST settings for your time zone manually.
To enable DST, select 'Enable DST' and enter the settings required.
These settings determine when DST starts and ends. When DST starts, the clock will go forward
one hour and return to normal time once DST ends.
Note: The DST end time does not take daylight saving into account. For example, setting 1.00
here means the time would revert at 2.00
Example Configuration:
In the UK, DST begins on the last Sunday in March at 2.00
October at 2.00
AM
Start: 3 (March), 5 (5
End: 10 (October), 5 (5
www.galsys.co.uk
galleonsupport.com
SIGNALCLOCK V2 Manual
AM
. Therefore, the settings would be:
th
Sunday), 0 (Sunday), 2, 0
th
Sunday), 0 (Sunday), 1, 0
with daylight saving.
and ends on the last Sunday of
AM
13
AM
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477