Copernicus DCS5 Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Стелажі та підставки Copernicus DCS5. Copernicus DCS5 13 сторінок. Document camera stand
Також для Copernicus DCS5: Посібник з монтажу (14 сторінок)

Друкувати сторінку

Change Projected Image Orientation

To change the orientation of the projected image, hold onto top mechanism and turn 90 degrees.

NOTE: Projected image may not rotate when device is rotated. To rotate image, tilt top mechanism down to allow device to adjust.

Change Mode from Document Camera to Stand

To change from document camera mode to tablet stand, hold top mechanism and tilt.

Fasten Dewey to Surface

Mount Dewey to a surface using the holes on the base.

The holes are made for 1/4" or M6 flat head

bolts/screws. Holes are countersunk.

The length and type of your hardware depends

on your surface thickness.

Mounting hardware not included.

Portrait Position

DCS5 DCS6 - Version A - Released October 30, 2020 - Copernicus Educational Products Inc.

Landscape Position

If swivel tension is

loose, tighten nut

with 10mm wrench.

If folding tension is loose,

tighten nut & bolt with

10mm wrench and the

provided allen key.