GALLERY STRETCHER-240 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Стрейч-пакувальні системи GALLERY STRETCHER-240. GALLERY STRETCHER-240 17 сторінок.
Друкувати сторінкуUnpacking & Set-up
Inside The Box
(1) Two foot pedals (detent type) mounted on base plate
(1) Pair Stretcher Blocks
(1) Instruction manual
(1) Pair safety glasses
(2) T-wrenches
(1) Air hose to machine
Bench Mounting (Gusseted Brackets not included)
Your machine was designed to be mounted in front of a typical workbench this is the
most effective method. This is best accomplished with gusseted brackets that can be
purchased at any big box store. Snap a line at 3.25" from the top of the workbench and
install gusseted brackets on the line. It is recommended that a plywood façade be
installed on the face of the workbench to provide support for the bottom leg.
The GS-60 has hose fittings beneath the machine. You will need to allow access to these
fittings to avoid crimping the hose. The best way to do this is to use gusseted brackets
and nothing else. The hose should hang straight down and the machine rests on them.
(you may decide to use small "c" clamps to secure it from below)
Grey
STAPLE GUN
Orange
Yellow
STRETCH PEDAL
White
Black
CLAMP PEDAL
2