HIGHLY LIQUID MD24 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису HIGHLY LIQUID MD24. HIGHLY LIQUID MD24 10 сторінок.
Друкувати сторінку
Highly Liquid
8.0 Outputs
8.1 Electrical Specifications
5V DC output, CMOS & TTL compatible
●
Maximum aggregate output current source/sink per MD24: 200mA
●
Maximum source/sink current per output: 25mA
●
8.2 Logic Wiring
Each MD24 output can be configured as a 5V "logic mode" output. See MD24 Firmware User Manual
for details. A logic mode output can be connected to CMOS or TTL logic inputs, can be used to power
LEDs, or can trigger other devices requiring a 5V signal.
Figure 8.1 shows a circuit which uses an LED to indicate the state of each MD24 logic mode output. The
value for current-limiting resistors will depend on choice of LED (1.0kΩ is typical).
Figure 8.1: LED Output Wiring
© 2011 Sonarcana LLC
MD24 Hardware Revision G
Page 9 / 10