DCS LDT-M1 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа DCS LDT-M1. DCS LDT-M1 15 сторінок.

To save the lens table, first be sure to insert an SD card into the WCU-4, then press the Save

button. The file will be saved on the folder/ARRI/ALEXA/LDA.

It is possible to change the name of the lens that will be displayed on the camera or motor

controller before finally saving onto the SD card. This name will also be the name of the lens file.

Press the Mode button and select insert, overwrite or delete a character. Press the Save button

when happy with the name to save it to the SD card.

Edit a Lens Table

An existing lens table can be edited with the WCU-4 hand unit and then stored back on the SD

card. Load the lens file to edit onto an SD card in the (folder /ARRI/ALEXA/LDA) and insert the

SD card into the SD card slot of the WCU-4.

Go to MENU > LENS DATA > LENS PROGRAMMING > EDIT LENS FILE.

Use the UP and DOWN soft buttons or the zoom stick to scroll through the list of lens files on

the SD card. Press the SELECT soft button or the User button to select a lens file.

On the following screen, use the FOCUS, IRIS or ZOOM soft button to select the lens scale to

edit. If metric and imperial scales exist, select the scale unit first.

The following screen provides three different options (OFFSET, SLIDE, SNAP) for editing

existing data points.

Offset Function

Use the OFFSET soft button to correct a fixed offset between the complete lens scale and the

corresponding scale on the WCU-4 screen:

Select a reference witness mark on the WCU-4 display (e.g. infinity).

While keeping the OFFSET soft button pressed, drive the lens scale to the corresponding