DCS LDT-M1 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа DCS LDT-M1. DCS LDT-M1 15 сторінок.

● The HU3 is now ready for basic operation.

Setting up the Alexa Mini

The Camera's internal lens mount must be disabled in order to use the external LBUS connector.

● Choose MENU > Electronic Control System (ECS) >Lens data > Lens info > Settings,

● Untick 'Enable lens mount'.

Change 'Focus unit' to 'Imperial'

Overlay Lens Data on a Monitor

In order to display lens data as an overlay on an SDI monitor, do the following:

● Choose MENU > Monitoring > SDI > SDI processing > Overlays > Status components,

● Tick on Lens data.

Rigging the camera

● Connect the LDT-M1 using the MDR Blue Cable from the MDR port on the LDT-M1 to

Serial 1 on the Preston MDR-3,

● Plug the LBUS Red cable from the CAM port on the LDT-M1 to the LBUS Port on the lens

mount of the Alexa Mini,

● Turn off the Arri WCU-4 handset,

● Connect the Preston Hand unit to the MDR,

● Use the calibration button on the LDT-M1 to calibrate the lens. Visually check all active

axes are calibrating,

● This system requires that the MDR is ALWAYS calibrated from the LDT, not the button on

the MDR itself,

LDT- M1 User Manual