HighPoint RocketRAID eSATA 3G HBASeries Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з монтажу для Контролер HighPoint RocketRAID eSATA 3G HBASeries. HighPoint RocketRAID eSATA 3G HBASeries 10 сторінок. Bootable raid
Також для HighPoint RocketRAID eSATA 3G HBASeries: Посібник з монтажу (13 сторінок)

Друкувати сторінку

Verify Software Installation

Step 1: Click on About this Mac

Step 2: Click on More Info

Step 3: Click on System Report

Step 4: Click on PCI Cards

Step 5: The RocketRAID eSATA 6G series controller will be identified as RAID

CONTROLLER.

Step 6: Verify the RocketRAID eSATA 6G HBA is detected and Driver Installed is

"Yes".

Note: Once Driver Installed is verified as "Yes" ,the WebGUI is also be

installed,too.Because the driver and WebGUI are in one package. You can just start

the browser to log in WebGUI.

Troubleshooting Tip: If the after installing the software package and the Driver

Installed is still "No", please try the following troubleshooting tips.

Step 1: Confirm that you have the RocketRAID eSATA 6G series controller software

package and not another HighPoint RocketRAID series controller that support Mac

OS X.