HighPoint RR2720A Посібник з монтажу - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з монтажу для Контролер HighPoint RR2720A. HighPoint RR2720A 15 сторінок. Raid controller
Також для HighPoint RR2720A: Посібник з монтажу (13 сторінок), Посібник з монтажу (13 сторінок)
Друкувати сторінкуLinux Rocky Linux on RR2720A Installation Guide
l.
Follow the prompts to complete the driver installation.
m. After the installation is complete, you can perform system update operations.
3 Monitoring the Driver
Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/rr272x_1x. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/rr272x_1x /x
This command will show the driver version number, physical device list and logical device
list.
4 Installing RAID Management Software
HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to RR2720A RAID controller. Installation of the
management software is optional but recommended.
Please refer to HighPoint RAID Management Software documents for more information.
- 10 -