HighPoint SSD7110 Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Контролер HighPoint SSD7110. HighPoint SSD7110 8 сторінок. Macos installation
Також для HighPoint SSD7110: Посібник з монтажу (9 сторінок), Як встановити (6 сторінок)

Друкувати сторінку

SSD7110 Controller macOS Installation Guide

4. Open 'Carbon Copy Cloner',

select RAID disk that you created in the EFI interface, then click 'Clone';

5. When cloning has finished, restart your Mac, then press and hold the Option (Alt) key immediately;

6. Release the Option key when you see the Startup Manager window;

7. Select RAID0 disk, then click the arrow under its icon, or press Return.

3. Troubleshooting

If you can't select your startup disk or start up from it

Check for a valid operating system on the startup disk

Make sure that your RAID disk is using a version of macOS that is compatible with your Mac. You might need

to reinstall macOS on that disk.

Check startup security settings (Refer to Step 3)

If you're using a Mac that has the Apple T2 Security Chip, check the settings in Startup Security Utility.

Check for Option ROM firmware

If you're in Startup Manager and can't see a third-party startup disk.

a. Make sure your 'Firmware password protection is off'.

SOURCE = select the disk that you want to clone, DESTINATION =

7/8