adeptus 53314 Інструкція з монтажу Посібник з монтажу - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень adeptus 53314. adeptus 53314 15 сторінок.
Друкувати сторінку
11
SECURE THE UNIT TO THE WALL WITH THE ANTI-TIP KIT
1. INSERT THE ANCHOR INTO THE WALL
APPROXIMATELY 1189MM (46,8IN) FROM THE
FLOOR (ADJUST FOR CARPET OR RUG
THICKNESS IF APLICABLE).
2. FEED PART B THROUGH THE SMALLER
HOLE IN THE BRACKET AND SECURE INTO
THE WALL ANCHOR. THE OTHER END OF
THE BRACKET SHOULD BE UPWARD.
3. FEED PART E THROUGH THE SMALLER
HOLE IN THE OTHER BRACKET AND SECURE
THROUGH THE BACK PANEL AND INTO THE
CENTER OF THE TOP PANEL. THE OTHER
END OF THE BRACKET SHOULD BE UPWARD.
4. FEED THE STRAP THROUGH THE LARGER
HOLE IN THE WALL BRACKET FROM
UNDERNEATH. BRING THE STRAP OVER TO
THE UNIT BRACKET AND THROUGH THE
HOLE FROM ABOVE.
5. INSERT THE POINTED END OF THE STRAP
INTO THE CLASP END OF THE STRAP AND
TIGHTEN DOWN.
SEE THE ENLARGED DIAGRAMS TO ENSURE
PROPER INSTALLATION.
•
•
•
•
•
B = 01
E = 01
Screw (Drawer Runner
Screw
to Drawer side & anti-tip)
3.5x30mm
NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HERE IN ARE COPYRIGHTED.
K = 02
Anti-Tip Bracket
3.0x16mm
NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HEREIN ARE COPYRIGHTED.
Q
K
K
E
M
B
Q = 01
M = 01
Anti-Tip Strap
Wall Anchor
•
•
•
12-15