HighPoint SSD7105 Посібник з монтажу - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник з монтажу для Корпус HighPoint SSD7105. HighPoint SSD7105 16 сторінок. Using nvme raid aics with the dell precision 3930 rack workstation
Також для HighPoint SSD7105: Посібник зі швидкого встановлення (8 сторінок), Посібник з монтажу (19 сторінок), Посібник з використання (19 сторінок)

SSD7105&7202&7502&7505&7540&7580A&7580B Boot RAID Windows Installation Guide

Check whether NVMe is connected to the controller.

Replace the motherboard slot, enter the UEFI environment and re-enter the command.

If none of the above methods work, please provide

using our

Online Support

possible.

Yellow warning before and after installation of the driver.

Before and after installing the driver, a yellow exclamation point warning appears in the lower

left corner of the installation interface.

Solution:

a. Please confirm "Boot from Storage Devices" is set to "UEFI driver first";

b. Confirm whether UEFI DVD is selected to enter the system installation interface.

When installing the driver, it prompts that the driver needs to be updated.

Solution: The appearance of the error message indicates that other NVMe Drives are

connected to your applicable motherboard. Try the following:

Remove all NVMe Drive installed on the motherboard and reinstall OS.

Portal, include a description of the problem in as much detail as

UEFI

log. You can submit a support ticket