DDK CM10-SP10S-S(D6) Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Кабелі та роз'єми DDK CM10-SP10S-S(D6). DDK CM10-SP10S-S(D6) 12 сторінок. Plug connector cable
Друкувати сторінку3. Cable Assembly Process
3-1. Cutting a cable
Cut the cable to the following dimensions:
Note! Not to change cable length.
* Cable cut length = 35± ± ± ± 0.5mm for CM10-SPxxS(D6) + Cable length
3-2. Inserting parts
Insert the clamp nut, the cable clamp, the bushing and the back shell to the cable.
Note! Pay attention to the direction each part is inserted.
Make sure that every part is inserted.
Back shell
3-3. Stripping a cable
Strip the cable's sheath to the A length, cut the wire set at its root and strip the core wire to the B length.
Note! Make sure to strip the cable to the correct length.
Do not leave cutting or scratch to the cable core.
* When making CM10-SP10S(D6), strip the cable for No. 10 terminal in a way that the A length
becomes 1mm longer than that of other cables.
(This is to prevent excessive tension of the cable when inserting the contact to the housing
in the next process.)
(A+1mm for No. 10 terminal only)
Ｂmm
Core wire
= 35± ± ± ± 0.5mm + Cable length
Bushing
Ａmm
Cable core
Cable length
Cable clamp
Product name
Sheath
CM10-SP10S-×(D6)
CM10-SP2S-×(D6)
Material No.
Page
TC-605
3/11
Cable
Clamp nut
A
B
18.5 to 19.5
4.5 to 5.0
17.5 to 18.5