CopperSmith CSPI-4812 Інструкція з монтажу Посібник з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Промислове обладнання CopperSmith CSPI-4812. CopperSmith CSPI-4812 13 сторінок.
Друкувати сторінкуCAUTION: The neutral wire (usually white) for the blower/motor must connect to the same neutral wire that
comes from the electrical panel to the liner. It is recommended to run a white neutral wire from the liner's white neutral
wire along the same path as the red wire from the liner's variable speed control to the blower/motor.
Variable - Speed Control Wiring Details (For remote blowers)
Black
120 volt AC from electrical panel (usually black) to liner
White
Neutral from electrical panel (white) to liner
Green
Ground from electrical panel (usually green) to liner
Red
120 volt AC variable control from liner to 120 volt AC line of variable speed ventilator
CAUTION: Do Not connect this wire to a 3-speed blower
IMPORTANT: CopperSmith
brand blowers inconsistent with these Installation Instructions. Always consult the switch manufacturer's installation
instructions when substituting control switches. The warranty may be voided if any unauthorized service, alterations
or repairs are made to the product.
IMPORTANT: Copy this page and previous page to your electrical installer.
All Models with Factory Installed Internal Motor/Blower
Diagram 1:
AMPS: House Electrical
Models:
CSPI-302
CSPI-362
CSPI-442
CSPI-482
CSPI-303
CSPI-363
CSPI-423
CSPI-306
CSPI-366
CSPI-426
CSPI-486
CSPI-4212
CSPI-4812
CSPI-5412
CSPI-6012
Diagram 2: Models Connected to Variable Speed Blowers
House Electrical
Models:
CSPI-30
CSPI-36
CSPI-42
CSPI-48
CSPI-54
CSPI-60
Revised 05/15/20
®
does not pay warranty claims for damage to liners or components connected to other
Wiring Diagrams
Panel
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
2.7
5.2
5.2
5.2
5.2
Panel
White (N)
120V Black
(L)
BLK
Liner
Green
White
120V Black
Liner
BLK
Green
WHT
GRN
WHT
GRN
120V Red
Ventilator
RED
Green, Ground
7