Coppertech WS-701A Інструкція з експлуатації
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Спікери Coppertech WS-701A. Coppertech WS-701A 2 сторінки. Bluetooth
Друкувати сторінкуoppertech
Wireless Bluetooth Speaker
Instruction manual
Quick Start Guide
Speaker overview: top
Previous track
Coppertech
Talk/Siri
Charging LED indicator
NFC
Bluetooth LED indicator
Speaker overview: back
ON OFF
On/O
switch
Speaker overview: front
Speaker 1
Charging your speaker
To obtain optimum power capacity, the speaker should be charged
using the provided USB cable in your packaging box. To charge the
unit plug the USB cable to the USB port on the back of the speaker.
Charging starts when the unit that is turned o is connected and the
charging LED indicator lights up in red. Charging is completed in
about 4-5 hours and the indicator goes o .
Connecting with a Bluetooth device
Turn on yourspeaker by switching the button on the back of the
unit to "On", the LED lights should alternate between shining red and
blue. This signal means that the speaker is in "pairing mode".
Perform the pairing procedure on the Bluetooth device to detect this
speaker. When a list of detected devices appears on the display of the
Bluetooth device, select "WS701A". Once paired successfully, the
Bluetooth LED indicator lights will turn blue and blink twice every
3 seconds.
Connecting with a smartphone by Onetouch (NFC)
If using a device that is NFC (Near Field Communication) enabled,
turn on NFC, then simply touch the speaker on the right side where
the NFC chip lies to make a connection.
2014.Coppertech All rights resrved N°4132945 www.coppertech.fr [email protected] 231 rue Saint-Honoré 75001 Paris France
Model WS-701A
Play/Pause
Next track
+
-
IN
Micro USB charging port
Listening to music
Start playback on the Bluetooth device, and adjust the volume.
Set the volume at an appropriate level on the connected device,
and adjust the volume with the VOL –/+ buttons on the unit.
To switch to the previous or next song simply press the Previous and
Next button on the speaker. This will switch to the previous/next
song in the playlist of the Bluetooth device. Press the Play/Pause
button on the speaker to start or pause songs.
Making a call/Receiving a call
You can use the WS-701A as a portable speakerphone for incoming
calls when connected wirelessly via Bluetooth. To answer a call, press
the TALK button and talk as you would with your device if it was on
"speakerphone" The built in microphone will pick up your voice just
like a phone. To end a call, press the TALK button again. To refuse a
call, double press the TALK button . You can re-dial the last number
called by double pressing the TALK button
Volume
up
Using SIRI
When the speaker is connected to an iPhone/iPad via Bluetooth,
Volume
press and hold the TALK button for 3 seconds to activate the Siri
down
function on iPhone/iPad. Then talk to the speaker after hearing the
"Siri " sound. Please note that iPhone/iPad may not be able to
recognize human speech when the speaker is being used in a noisy
environment. Siri may not work if iPhone/iPad is not connected to
the internet. When the Siri conversation is nished, the speaker will
continue playing audio.
Line-in
audio jack
AUX input
To play audio using the audio cable, plug the cable from the audio
device to the "IN" jack on the back of the speaker.
Battery status on iPhone et iPad
When the speaker is connected to iPhone/iPad via Bluetooth, the
battery status of the speaker can be displayed on the top of the
Speaker 2
iPhone/iPad screen, after the Bluetooth symbol. Please note that the
battery status icon can be vertical or horizontal, depending on the
Bluetooth device and its operation system.
Spesifications
Bluetooth compliant.............................................Bluetooth 3.0
Dimensions..............................................................6 cm x 16,3 cm x 4,3cm
Weight........................................................................0,330 kg
Speaker driver.........................................................stereo, 40MM, 4Ohm
Speaker output......................................................5W*2
Operating Frequency Range............................2.4GHz-2.48GHz
Battery capacity....................................................1000mAh
Battery life ..............................................................Up to 10 hours(depending
on the volume and audio content)
Battery charging time..........................................4-5 hours
Operating temperatures....................................0ºC to 45ºC
Bluetooth transmission distance....................Up to 10 meters, measured
in open space. Walls and structures may a ect range of device.
Battery Charging voltage..................................5V(1A)
Working voltage...................................................3.3--5V
Interface..................................................................Bluetooth, 3.5MM audio
line-in & line-out jack, Micro USB charging port
Page 1