AGROWPLOW AD230 Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Сільськогосподарське обладнання AGROWPLOW AD230. AGROWPLOW AD230 7 сторінок. Clutch update

Process

Before you start

Watch the AD230 clutch update video to familiarise yourself with the process.

●

Download and familiarise yourself with the AD230 Parts Manual, especially pages 36-43. Keep a copy

●

on-hand while performing the update.

1. Preparation

Raise the AD230 into a disengaged position to remove pressure on the drive and clutch assemblies.

Check appropriate safety measures. Lock the hydraulic pressure off, take the keys out of the tractor apply

park brake and insert the safety chocks in the wheel hydraulics.

Remove the clutch bay guard by undoing the two hinge bolts on either side.

Remove the Farmscan pickup sensor (640-4171 & 114-3023) from the side of the clutch bay.

2. Disassemble clutch assembly

Loosen the chain tensioner (640-4240) and unhook the tension spring (640-4203) from the clutch lever

assembly.

Remove the bolt that links the clutch lever assembly to the clutch arm. Lower clutch arm (640-4140) from

the clutch lever assembly.

Remove the chain (640-5008) linking the clutch assembly to the drive wheel to gain access to the roll pins

on the sprocket. You may need to remove the chain link to do so.

Remove the clutch lever pivot (640-3087).

Knock out the roll pins (112-4036) from the clutch drive shaft.

Knock out the roll pin (140-4121) mounting the clutch slide to the clutch shaft.

Remove the five nuts mounting the uni-hub (161-0120) to the side of the clutch bay.

Gently slide the clutch shaft and hub towards the centre of the seeder to allow enough clearance to

remove the sprocket (640-4076) and clutch drive (640-4075) from the clutch shaft.

Remove the nut on the hub side of the clutch lever assembly. This will allow you to remove the clutch lever

shaft (640-4081), along with the remaining parts of the lever assembly.

10. Remove the clutch slide (640-4077).

Page