CopterX CX-CT6A Інструкція з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пульт дистанційного керування CopterX CX-CT6A. CopterX CX-CT6A 18 сторінок. Computer transmitter, 6 channel, 2.4 ghz digital propotional radio control system

Друкувати сторінку
To use double ratio control of CH1/CH2/CH4 channel, click
"DR". It gives you the best control of the model. It is also a great
help for beginners.
CH1/CH2/CH4 channels can be adjusted individually. Adjusted
value is from 0% to 100%. You may enter the numbers directly
from the keyboard. This function will only be effective when
the "DR" button is switched on.
Click "OK" when the adjustment is finished.
To adjust the control mode according to one's own habit, click
"Stick". There are four different modes for selection.
Click "OK" when the adjustment is finished.
To adjust engine throttle curve to make it more suitable for the
model, have a better performance and gain better control of
the model, click "Thro Curv". There are two parts: Normal State
(NOR) and Stunt State (IDEL). Each curve is made up of five
points and each point can be set up individually. Adjusted
value is from 0% to 100%. You may enter the numbers directly
from the keyboard.
Click "OK" when the adjustment is finished.
To adjust the helicopter PIT, click "Pith Curv". By this function,
you can get a better control of the model. There are two parts:
Normal State (NOR) and Stunt State (IDEL). Each curve is made
up of five points and each point can be set up individually.
Adjusted value is from 0% to 100%. You may enter the
numbers directly from the keyboard.
Click "OK" when the adjustment is finished.
To select model, click "Type". There are four models in this
system for selection: ACRO, HELI-90, HELI-120 and HELI-140.
Click "OK" when the adjustment is finished.
14
CX-CT6A
Computer Transmitter