Gallien-Krueger MB 800 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Gallien-Krueger MB 800. Gallien-Krueger MB 800 11 сторінок. Mb series
Також для Gallien-Krueger MB 800: Посібник користувача (11 сторінок)
Друкувати сторінку
Installation: To insure proper operation and to
avoid potential safety hazards, place the unit on a
firm, level surface.
Ventilation: Make certain that proper space is
provided for ventilation. Never block the fan vent
holes located on the sides of the amplifier. If the
amplifier will be installed in a rack or other
enclosed area, make sure that there is sufficient air
movement within the enclosure to allow proper
cooling. Consult your dealer for more information.
Avoid installation in extremely hot or cold
locations, and areas that are exposed to direct
sunlight, or near heating equipment. Avoid moist or
humid locations.
Remember, power amplifiers generate heat. The
ventilation slots on the enclosure are specifically
designed to remove this heat. Blocking or placing
other electronic equipment near the heat dissipation
system may possibly affect the long-term reliability
of both your amplifier and the other equipment.
Moving the Unit: Before moving the unit, be
certain to disconnect any interconnection cords
with other components, and make sure that you
disconnect the unit from the AC outlet.
Cleaning: When the unit gets dirty, clean only with
a dry cloth. Never use benzene, thinner, alcohol, or
other volatile cleaning agents. Do not use abrasive
cleaners, as they may damage the finish of metal
parts. Avoid spraying insecticides near the unit.
Maintenance: Your new amplifier is rugged. It
was built to give you a lifetime of trouble free
operation, if it is operated in accordance with the
instructions contained in this manual. The only
MB 800
maintenance required is cleaning. If you are going
to move your amplifier around frequently, we
recommend a road case to protect it from scratches
and road wear.
Packaging: The carton and packing materials used in
shipping your new amplifier were specifically
designed to cushion it from the shocks and vibration
that occur during transport. We suggest that you save
the carton and packing materials for use in shipping,
in the event you move, or the amplifier needs repair.
9