Dynex DX-CR312 Поширені запитання - Сторінка 2
Переглянути онлайн або завантажити pdf Поширені запитання для Адаптер Dynex DX-CR312. Dynex DX-CR312 5 сторінок. Lecteur de carte mémoire 20-en-1
Також для Dynex DX-CR312: Посібник (6 сторінок), Посібник користувача (13 сторінок), Посібник з швидкого налаштування (2 сторінок), Посібник користувача (англійською) (13 сторінок), (Французькою) Manual De L'utilisateur (13 сторінок)
Друкувати сторінку
Setup Questions
Question 1: How do I set up my card reader using Windows XP, Vista, or 7?
1. Plug the small end of the included USB cable into the card reader and the other end into
an available USB port on your computer.
§
2. Insert a card into the appropriate slot. The green LED lights.
Caution: Cards must be inserted into the correct slot and label side up; otherwise,
you may damage the card and/or the slot.
3. Click Start, then click My Computer/Computer.
4. Double-click the appropriate drive to access the data on the memory card.
Question 2: How do I set up my card reader on a Mac?
1. Plug the small end of the included USB cable into the card reader and the other end into
an available USB port on your Mac.
2. Insert a card into the appropriate slot. The green LED lights and a new icon appears on
the desktop.
Caution: Cards must be inserted into the correct slot and label side up; otherwise,
you may damage the card and/or the slot.
3. Double-click the new icon to access the data on the memory card.
Question 3: New Removable Disks do not appear in My Computer/Computer when I
connect my card reader to a Windows PC.
·
Make sure that your memory card is fully inserted into the slot on the card reader.
·
Make sure the card reader is connected to your computer. Unplug and reconnect your
USB cable.
·
Try a different memory card of the same type in the same slot. If a different memory card
works, the original memory card should be replaced.
·
Disconnect the USB cable from your card reader and shine a flashlight into the empty
card slots. Look to see if any pin inside is bent, then straighten bent pins with the tip of a
mechanical pencil. Replace your memory card reader if a pin has bent so much that it
touches another pin.
·
Unplug your card reader from the USB port and restart your computer. Reconnect your
card reader to your computer.
Question 4: When I insert a card into the card reader, no icon appears on my Mac
desktop.
·
Make sure that your memory card is fully inserted into the slot on the card reader.
·
Make sure the card reader is connected to your computer. Unplug and reconnect your
USB cable.
·
Try a different memory card of the same type in the same slot. If a different memory card
works, the original memory card should be replaced.
·
Disconnect the USB cable from your card reader and shine a flashlight into the empty
card slots. Look to see if any pin inside is bent, then straighten bent pins with the tip of a
mechanical pencil. Replace your memory card reader if a pin has bent so much that it
touches another pin.
·
Unplug your card reader from the USB port and restart your computer. Reconnect your
card reader to your computer.
·
The card may have been formatted in Windows FAT 32 format. Using a PC or digital
device, reformat the card using OS X-compatible FAT or FAT16 format.
Your computer automatically installs the correct drivers. Five new Removable
Disk drives appear in My Computer/Computer.
2