Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу для Адаптер Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card. Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card 7 сторінок. Usb card bus adapter
Також для Dynex dx-uc202 - USB 2.0 PCMCIA Notebook Card: Посібник з швидкого налаштування (2 сторінок), Посібник користувача (16 сторінок)
Друкувати сторінку
5. Plug the other end of the power cord into the power jack on card bus adapter. Then it will be
ready to accept your USB device for application.
External power adapter requirements:
The card bus adapter supports the following list of low-powered peripherals. If you need to
connect a high-powered device such as USB floppy disk drive or high speed rpm of 2.5"HDD,
your system might crash or will not detect the device by windows. This may cause the power
cable to not provide an enough power current. For this situation we recommend you connect an
external power supply to get more power current for the hi-powered device.
The external power adapter is an optional accessory
separate
purchase**). Please see the following specification and order from your local dealer.
Low-powered
device:
High-powered
The external power supply specifications:
1. Output: DC 5V /1 A (2-port), 5V /2 A (4-port)
2. Power plug: 1.3∅(inner)* 3.5∅ (outer)*9.6mm(length)
Mouse 、 keyboard 、 Flask disk 、 USB Ethernet 、 Card reader 、 data linker
or self-power device such as: Printer、USB audio speaker、scanner、
digital camera...etc.
device:
USB floppy disk drive、high capacity or high speed RPM of 2.5"
storage enclosure、USB camera...etc.
(**NOT INCLUDED, but available for