AFL DFS1 Короткий довідник - Сторінка 2

Переглянути онлайн або завантажити pdf Короткий довідник для Вимірювальні прилади AFL DFS1. AFL DFS1 8 сторінок.

DFS1 Controls and Interfaces
Name
Focus Adjust Knob
Display Capture
Button
USB Cable and Port
Probe Dust Cover
Probe Base
Interchangeable Probe
Adapter Tips
No batteries or AC supply is required, as the DFS1 is powered from the device (NOYES
OTDRs or Certification Testers) attached to the USB port.
Configuring the DFS1 for Fiber Inspection
How do I change adapter tips?
1. Identify the type of Probe Adapter Tip to install on the probe base. Pre-configured kits
are available with commonly used FC, SC, and/or LC adapter tips. Additional probe
adapter tips are available for other connector types.
(See the DFS1 Adapter Tips Selection Guide for a complete listing and ordering
information for available probe adapter tips.)
– For jumper cables with SC, FC, ST, E2000 or other connectors having a 2.5 mm PC or
UPC ferrule, use the Universal 2.5 mm PC male adapter tip engraved 'U25'.
– For jumper cables or connectors having a 2.5 mm angle-polished ferrule, use the
Universal 2.5 mm APC male adapter tip engraved 'U25A'.
– For jumper cables with LC, MU, LX.5 or other connectors having a 1.25 mm PC or
UPC ferrule, use the Universal 1.25 mm PC male adapter tip engraved 'U125'.
– For FC/PC or SC/PC bulkhead adapters, use the FC/SC bulkhead adapter tip
engraved 'FS'.
Key Function
Rotate to focus on fiber end-face
Press to capture image to the attached device (OTDR or
Certification Tester) for labeling and storage
- Powers the DFS1 from the attached device (OTDR or
Certification Tester)
- Communicates digital fiber end-face images to the attached
device (OTDR or Certification Tester)
Protects probe base and adapter tip when not in use
Accepts interchangeable probe adapter tips. Includes alignment
key and threaded locknut to securely retain installed adapter tip.
Adapts DFS1 for precise viewing of fiber end-faces on a wide
variety of fiber optic connectors and bulkhead adapters
2