HIHAP HE-143 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Інвертор HIHAP HE-143. HIHAP HE-143 16 сторінок. 28000mg ozone generator

How to clean the ozone plate:

Wash the stainless steel screen and ceramic plate using a spray

cleaner or detergent. Scrub with a stiff brush. A spray liquid cleaner

with ammonia or chlorine may also be used to remove any non-visible

adherents. Be careful not to drop the plate. Rinse plate thoroughly in

hot water and dry completely before reinstalling. A hair dryer may be

used to dry the plate more quickly.

When running the device, it has a burning smell, and/or appears to be

Ozone produces a smell or odor that smells like bleach or electric

smell. This is normal during Ozone use.

If you suspect a problem with your unit check the following:

1) Unit is plugged in properly.

2) It's important that the Ozone Generator be properly

grounded to avoid potential shock.

Fuse is installed properly and in good condition.

To replace fuse, pull out the plastic fuse holder, remove old fuse

and insert new fuse. ( 220-240 Volt, 3 Amp)

Refer to picture as follows