Coralife Bio Cube Інструкція з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Coralife Bio Cube. Coralife Bio Cube 12 сторінок. Size 16
Також для Coralife Bio Cube: Інструкція з експлуатації (13 сторінок)
Друкувати сторінку
4. Disassemble pump and impeller. Rinse and wipe
down all parts to dislodge debris and particulate
matter (Figure 21).
Note: If calcium buildup is present, soak in a
vinegar solution with 1 part vinegar : 1 part water
for 1 hour and rinse thoroughly.
Pump
Pump
Housing
Impeller
9 - 12 MONTH MAINTENANCE
Caution: Let lamps cool down before handling.
Note: Replace compact fluorescent lamps anually.
1. Open canopy and unscrew light lens cover
(Figure 22).
FIGURE 22
Polished Reflector
Compact Fluorescent
Endcaps
Silicon Retaining
Bands
Compact
Fluorescent Lamps
Light Lens Cover
Screws (4)
2. Remove the silicon retaining band from the
lamp clip.
3. Carefully lift lamp-end free from lamp clip.
4. Gently disconnect compact fluorescent lamp from
endcap. Remove and dispose of lamp properly.
5. Install new compact fluorescent lamp to the
canopy.
MAINTENANCE
FIGURE 21
Pump
Stainless
Steel Shaft
Cover
and Outlet
LED
Lamp
Lamps
Clips
Note: Make sure the lamp is fully seated
in the endcap.
6. Replace silicon retaining band onto lamp clip
to secure the compact fluorescent lamp.
7. Attach light lens cover to canopy.
Replacing/Adding LED Bars
Caution: Let lamps cool down before handling.
Unplug all power cords.
1. Open canopy and unscrew and remove light
lens cover (Figure 23).
FIGURE 23
2. Carefully push back LED bar clip and lift,
then pull LED bar contact end away from
LED contact to remove.
3. To replace, insert LED bar contact end
into LED contact. Push down on LED bar
clip end to allow LED bar clip to click the
LED bar into place.
Note: Make sure the LED bar is fully seated.
7. Attach light lens cover to canopy.
FIGURE 24
LED Contact
LED Bar
Contact End
LED Bar Clip