Coralife Bio Cube Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Coralife Bio Cube. Coralife Bio Cube 13 сторінок. Size 16
Також для Coralife Bio Cube: Інструкція з експлуатації (12 сторінок)
Друкувати сторінку
Cooling Fan
1. Make sure that the cooling fan is on and blowing
across the unit.
FIGURE 4
Cooling Fan Air Discharge
WARNING:
Do not obstruct cooling fan air input and cooling fan
air discharge.
Keep canopy vents clean from dust and debris.
OPERATION
Wet/Dry Filter Start-Up Operation
1. Open canopy and remove filter cartridge. Rinse
thoroughly with cool freshwater and reinstall in
1st chamber.
2. Rinse substrate, sand, gravel, rocks, driftwood,
plants and ornaments and add to aquarium.
3. Prepare aquarium water (saltwater/freshwater).
Make sure water is at room temperature to
prevent condensation.
4. Slowly add water to the aquarium. Make sure to
fill aquarium up to the lower edge of the top
moulding (Figure 5).
FIGURE 5
Wet/Dry Section
5. Plug water pump power cord into an outlet or
power source. Pump will raise water level in
aquarium section and drain into wet/dry section
(Figure 6).
FIGURE 6
Wet/Dry Section
6. Because chamber 1 has a high and stable water
level, it is recommended to insert an aquarium
heater in this section, as required.
8
Aquarium Section
Top Moulding
Fill Level
Aquarium Section
Fill Level