Galvin Specialised CliniLever Lead Safe TM-SHWX Інструкція з монтажу виробу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу виробу для Сантехнічний виріб Galvin Specialised CliniLever Lead Safe TM-SHWX. Galvin Specialised CliniLever Lead Safe TM-SHWX 4 сторінки. Stainless steel shower mixer
Друкувати сторінку
Mounting point
3. Secure Mixer Body
To allow proper fitment of the wall flange,
allow a gap between 2mm & 7mm (as
shown) between the finished wall and the
rear of the main body.
Secure the mixer body using the mounting
points.
5. Fit Handle & Flange
Re-fit handle & flange ensuring care is taken
to avoid scratching the mixer body.
7. Test
Once the shower mixer has been fitted, turn on mains water and check for leaks and correct
operation.
Mixed water outlet
Hot water inlet
4. Fit Water Connections
Ensure water supply lines are flushed before
connecting.
Fit the water connections as shown.
Ensure thread tape/sealant is used.
Note: This wall shower is not fitted with a flow
restrictor. Never operate without a flow restrictor, as
outlet will deliver full mains pressure with
unrestricted flow.
6. Secure Handle & Fit Indicator Button
Using the supplied hex key, fit the grub screw
as shown and secure the handle.
Fit the indicator button as shown.
Version 1, 7 May 2020, 3 of 4
Version 1, 7 May 2020, 3 of 4
Cold water inlet
Version 3, 7 May 2020, Page 3 of 4