Dynisco TPG543 Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Dynisco TPG543. Dynisco TPG543 11 сторінок. Melt pressure gauges

Друкувати сторінку

4 4 4 4 4

2.3

Wiring (all models)

Wiring for all models is accomplished at rear of the gauge enclosure.

A separate kit included with gauge contains different size strain reliefs

to facilitate use with various gauge wire. Insert wire through correct

relief fitting and assemble strain relief as shown in Figure 6. Attach

strain relief assembly to gauge enclosure using four screws provided in

kit, as shown in Figure 7.

NOTE: This device operates on 12 VDC not 120 VAC

Fig. 6 & 7

2.4 Terminal Connections

5 Position Terminal Block -

Alarm Versions Only

1 Relay Contact (N.C.)

2 Common

3 Relay Contact (N.O.)

4 Reset

5 Automatic/Manual

(2 Position Terminal

Block - All Models)

12V Supply (-) (BLK)

12V Supply (+) (Red)

(Power Supply Terminal

Block -G115 Option)

Neutral (WHT)

115 or 230 (BLK)

DYNISCO PG500 Series

Fig. 8