Coram Showers OPTIMA Посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник для Сантехніка для ванної кімнати Coram Showers OPTIMA. Coram Showers OPTIMA 16 сторінок. Extender pack
Також для Coram Showers OPTIMA: Посібник (2 сторінок), Посібник (2 сторінок)

Друкувати сторінку
3
a
X
a: Place the wall channels on the tray ensuring they are vertical and an equal distance back from the front of the tray.
Place masking tape against the wall before marking drill hole positions, this will help prevent the drill bit slipping. Drill 6.5mm
holes, 30mm deep and insert the wall plugs.
b: Apply sealant to the back of the wall channels. c: Fix the wall channels to the walls using 8 x 32mm screws and screw caps.
a
4
a: Insert the side panel into the wall channel ensuring that the corner post is the same distance in from the edges of the tray as
the wall channels.
b: From inside the enclosure, in the positions shown, drill through the wall channel into the side panel using a 3mm drill bit,
do not drill too deep! Fix using 3 x 10mm screws and screw caps.
10
Y
ø 6.5
mm
X = Door widths
1500 = 1450 - 1500mm
1700 = 1650 - 1700mm
b
Y = Side Panel widths
700 = 670 - 695mm
760 = 735 - 760mm
800 = 775 - 800mm
900 = 875 - 900mm
b
Inside
side panel
c
Inside
32mm
ø 3
mm
10mm