maimin SABRE 3000 Інструкція та посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція та посібник з експлуатації для Різак maimin SABRE 3000. maimin SABRE 3000 20 сторінок. Straight knife cutting machine with flexi-band sharpener
Також для maimin SABRE 3000: Інструкції та перелік деталей (12 сторінок)
Друкувати сторінкуWhen using your cutting machine, basic safety instructions should always be followed
including the following:
This cutting machine
is
for commercial
use
only. Read all instructions before using.
DANGER--to
reduce
the
risk of electric
shock:
1.
Do not install or
store
this machine in
a
wet location.
WARNING--Io
reduce
the risk of
btrns, fire, electric
shock, or
injury to
persons:
use machine only for its intended
use as a
portable cutting machine.
Turn machine to
"oFF"(o)
before connecting or disconnecting power cord.
Connect this machine to
a
properly grounded outlet only.
See
Grounding Instructions.
Always disconnect electrical connector from machine when not using it, before servicing it, or
changing blade.
Do not leave machine unattended while
it
is connected to power outlet.
Do not
operate
machine
with
a
damaged
cord or
if
machine
has
been
dropped. Do not disassemble --
take to
a
qualified
serviceman
for refairs. Incorrect
assembly can cause
electric shock when the
machine is
used.
Keep hands and fingers away from blade and moving parts.
Keep guards in place and
in working
order,
The
knife
key and other wrenches must be removed from machine before starting the motor.
Keep ventilation openings of machine free from dust and lint.
Keep machine clean and blade sharp for best and safest performance.
5.
6.
l.
2.
3.
4.
7.
8.
9.
10.
11.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This machine must be
grounded.
In
the event
of malfunction or
breakdown, grounding provides a path
of
least resistance
for
electric current to
reduce
the risk
of
electric shock. This machine
ii
equipped
with
a
Ground Shield surrounding the Terminal Pins;
this
Ground Shield is designed
to
be used
with
a Maimin
Grounded Connector, part
#4584
or
4588.
See
Wiring instructions
supplied
with
the Connector.
D
{NGER
--
Improper connection
of
the Maimin
Connector can result
in
a risk
of
electric
shock.
Check
with a
qualified electrician
or
service
man
if
the
grounding instructions
are not
completely
understood or
if
in doubt
as
to whether the machine is properly
grounded.
Do not modifu the Ground Shield provided with this machine.
Use correct
wire
sizes
with
the
Maimin
Grounded Connector.
U.S.A.
only:
I
Phase: Use
AWG
1613
SJ,
SJT
or
SJE
3
Phase: Use
AWG
16/4
SJ,
SJT
or
SJE
International: I P+N+:
Use
3Xl,
Omm
CEE (2)
6l
'
3
F+:
Use
4X1,
Omm
CEE (2)
61
lI.
Maimin
Co.,Inc.
P.O. Box
549
Route
341
Kent,
CT
06757 U.S.A.
Printed
in U.S.A