CORBERO FE 1240 S/0 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Холодильник CORBERO FE 1240 S/0. CORBERO FE 1240 S/0 8 сторінок.
Також для CORBERO FE 1240 S/0: Інструкція з експлуатації (20 сторінок)

Друкувати сторінку

INSTALLATION

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

Ensure that air can circulate freely around the back

of the cabinet. To ensure best performance, if the

appliance is positioned below an overhanging wall

unit, the minimum distance between the top of the

cabinet and the wall unit must be at least 100 mm

(A). Ideally, however, the appliance should not be

positioned below overhanging wall units (B).

Accurate levelling is ensured by one or more

adjustable feet at the base of the cabinet.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply. Voltage

can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a

contact for this purpose.

If the domestic power supply socket is not earthed,

connect the appliance to a separate earth in

compliance with current regulations, consulting a

specialist technician.

The Manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with the following

E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference

suppression.

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.

NP006