Gama Sonic 66B50010 Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Зовнішнє освітлення Gama Sonic 66B50010. Gama Sonic 66B50010 4 сторінки. Aria solar wall light
Assembly Instructions
•
Using the wall bracket (C) as a template,
mark where the two holes will need to be.
•
Using an electric drill, make two holes
no larger than the size of the included
anchors.
•
Place the anchors in the holes.
•
Align the wall bracket (C) with the holes
and secure it using the provided screws.
•
Attach the top (A) to the wall bracket (C)
and secure by tightening the two set
screws with the provided hex wrench.
NOTE: The lamp will only attach to the
bracket in one direction. Make sure the slot
for the notch is facing forward so the lamp
will attach to the bracket.
C
page 3
Operation Instructions
•
Insert the GS Solar LED Bulb by twisting
clockwise.
•
•
Replacement Parts
Replacement Batteries and Bulbs are
A
available at www.gamasonic.com or via our
Toll Free number: +1-800-835-4113.
Your Lamp can use the following bulbs:
A60WW20W – included bulb with Warm
White LEDs (2700K)
A60BW20W – bulb with Bright White LEDs
(6000K)
F30WW05W –Flame bulb with simulated
flame LEDs
T45WW10W – Edison LED Bulb with Warm
White LEDs (2700k)
Your lamp uses the following battery:
GS32V30
Move the operation switch on the back
of the lamp to the Low or High position
according to your preferences:
- Low: softer light and longer duration
- High: brighter light output
The solar lamp will automatically operate
at dusk.