Jacuzzi SHER120 Посібник користувача та інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача та інструкція з монтажу для Фільтр для басейну Jacuzzi SHER120. Jacuzzi SHER120 4 сторінки. Sherlock element pool filter
Також для Jacuzzi SHER120: Посібник користувача та інструкція з монтажу (6 сторінок), Посібник користувача та інструкція з монтажу (4 сторінок)
Друкувати сторінку
What you should have - Filter system parts breakdown:
System to Pool 6' Hose Kit (Included in
Systems with HK6 in Model Number).
(a)
(b)
Tools you will need:
For most installations all you will
need are (a) screwdriver (b) wide
mouth pliers and (c) adjustable
wrench.
Parts for System
Components:
Setting up your system:
Step 1
Install threaded end of interconnect pipe
into the filter "INLET." Tighten until O-ring
seals against filter.
NOTE: Be sure union nut is placed on
interconnect pipe before it is threaded
into filter. Threads on union nut should
face away from the filter.
Step 2
Note that there are three (3) "notches"
cut out of the bottom of the filter. Note
also that there are three (3) raised
"blocks" on the inner circle of the base.
Place the filter onto the base with the in-
terconnect pipe facing towards the pump
mount "pedestals". Press down and ro-
tate as necessary until the "notches" on
the bottom of the filter engage with the
"blocks" on the base. The filter will drop
down and lock into place. Locate the three (3) large "cutouts" around the perimeter
of the base where the filter inserts into the base. Look into the "cutouts" and locate
the 1" slots molded into the base. The pre-drilled holes at the bottom of the filter
should line up with the 1" slots in the base. Attach filter to base with the three (3)
12-14 x 3/4" screws provided.
Step 3
Be sure that the O-ring is firmly seated in
the O-ring groove in the end of the inter-
connect pipe.
2
Parts For Models SHER80 and 120:
FIG. NO.
PART NO.
42-3671-02-R
1
42-3677-06-R
2
42-3677-06-R10
39-2547-01-R
3
39-2547-01-R50
4
47-0106-08-R
5
9193-4182-R
6
42-2852-05-R
42-2998-00-R
47-0380-47-R
7
42-3674-09-R
8
42-3675-08-R
(c)
42-3674-19-R
42-3675-18-R
42-2946-03-R
9
42-2947-02-R
10
42-3662-00-R
11
47-0228-01-R
12
43-3092-02-R
43-3091-03-R
Nut
Blocks
Notches
DESCRIPTION
Ring-Lok™
Cover latch
Cover latch (10 per bag)
Air bleed valve knob w/ O-ring
Air bleed valve knob w/ O-ring
(50 per bag)
O-ring 3/16 x 3/8 x 3/32
Pressure gauge 0-60# 1/4 CBM
Cover - 80 sq. ft.
Cover - 120 sq. ft.
O-ring 11-1/2 x 11-7/8 x 3/16
Element assy. 80 sq. ft. 14.59 LG
Element assy. 120 sq. ft. 20.90 LG
Microban Element assy. 80 sq. ft.
Microban Element assy. 120 sq. ft.
Dirt catcher 80 sq. ft.
Dirt catcher 120 sq. ft.
SherLok 1-1/2 filter body
O-ring
Plug 2" w/ O-ring
Plug 1-1/2" w/ O-ring
FIG NO.
1
2
3
4
6
7
8
9
10
Step 4
O-Ring
Position the pump on the base "pedes-
tals" with the pump strainer basket over
the strainer support pedestal as shown.
Connect the union nut on the intercon-
nect pipe to the pump discharge and
hand-tighten only.
Using the two (2) 14-10 x 3/4" screws
supplied, locate the predrilled holes on
the "pedestals" and secure pump to the
Interconnect
base.
pipe
Step 5
Be certain that the filter cover is pushed
completely down and the Ring-Lok nut is
tightened to the "built-in stops" and yel-
Cutout
low safety latch is engaged.
Step 6
Carefully install the pressure gauge into
the filter cover after wrapping the brass
threads with 4 wraps of teflon tape
Note: Some gauges have teflon tape fac-
tory installed.TIP: Install pressure gauge
O-Ring
only hand-tight plus 1/4 turn.
PART NO.
DESCRIPTION
9422-4052-R
Element 80 Filter
9422-4060-R
Element 120 Filter
12-1152-00-R
Base
14-4340-96-R3
P.L. Hex Capscrew 12-14 x 3/4" (3 per bag)
14-4020-02-R2
P.L. Hex Capscrew 14-10 x 3/4" (2 per bag)
14-4273-06-R
Interconnect Nut
47-0328-00-R
O-Ring 1-7/8 IC x 3/16 TK
42-3632-00-R
Interconnect Pipe
47-0228-68-R
O-Ring 1-7/8 ID x 3/16 TK
9402-2955
S1BU9-6 Pump
9402-2960
S15BU9-6 Pump
If the Ring-Lok nut is not
tightened so yellow
safety latch is engaged,
the filter cover may blow
off causing injury or
property damage.
Motor Mount
Pedestals
Strainer Support
Pedestal