Gama Sonic BAYTOWN GS-106FPW Інструкція з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Ліхтар Gama Sonic BAYTOWN GS-106FPW. Gama Sonic BAYTOWN GS-106FPW 4 сторінки.

Operation Instructions

1. Remove the Top part (B) from Body part (C) by unscrewing the 2 screw caps. Turn

the operation switch (Fig. 2) to either Bright white or warm white position according

your preferences. The Solar Lamp will automatically operate dusk to dawn.

2. Reattach the Top part (B) to the Body part (C) and secure with the 2 screw caps.

Installation Instructions

1. Install finial by screwing part (A) on the Top part (B) (Fig. 1).

GS-106P

1. Screw in part G into part C as shown in Fig. 1.

2. Use a drill to make two holes in the desired surface,

3. Place the white screw anchors into the drill holes, place the lamp in line with the holes

and screw down with the provided screws

Note: There are specific types of screws for specific surfaces. If unsure of the appropriate type

of screw to use on your desired surface please consult a professional.

GS-106W

NOTE: For best results locate your solar lamp facing the south.

1. Screw part E into part D as shown in Fig. 1.

2. Screw part C (full lamp) into part D.

3. Remove the silver back bracket by removing the 2 screw caps on the front face

of the wall mount.

4. Screw the silver bracket onto the desired surface.

Place lamp onto bracket and replace 2 wall mount screw caps

GS-106F

NOTE: If you are replacing an existing gas/electric post light, you must consult a

certified technician to cancel them before installation.

1. Screw part F into part C as shown in Fig. 1.

2. Position Part (F) on top of the existing 3" post and tighten it using the screws provided.

Fig. 2