Corbin Russwin Access 800 Інструкція з монтажу Посібник з монтажу - Сторінка 16
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Замки. Corbin Russwin Access 800. Corbin Russwin Access 800 17 сторінок. Cl33800 tcac2 series cylindrical lockset
Також для Corbin Russwin Access 800: Інструкція з монтажу Посібник з монтажу (16 сторінок), Інструкція з програмування (16 сторінок)
Друкувати сторінку
7) ML20800 TCAC2 Hard Wiring Instructions
7.6) M35 Power/Remote Unlocking Harness.
784
9VDC
+9 VDC
Power Supply
EGND
120 VAC L/N/G
Normally Open
momentary switch
(Remote unlock
- REX option)
NO
C
Black, 1
Red, 2
White, 3
Green, 4
Orange, 5
Blue, 6
Brown, 7
Yellow, 8
8 wires and pigtail harness
Installation:
1. ElectroLynx™ System Wiring Instructions (refer to Fig. 1 and Fig. 3)
a. Look for the mating part on ASSA ABLOY doors and frames. Then plug in all
connectors as shown in Fig. 3 during product installation.
b . Hard wire 784 power supply as shown.
2. Non-ElectroLynx™ System Wiring Instructions (refer to Fig. 1 and Fig. 3)
Cut the 8-pin connector off the Power/Remote Unlocking harness and hard wire
a.
to non-ElectroLynx™ door harness. Remote power requires three conductors and
remote unlock requires two conductors.
b . Hard wire door harness to power transfer device.
Hard wire 784 power supply as shown.
c.
Door
Outside
Escutcheon
-9 VDC
Power/Remote Unlocking
ElectroLynx Wiring System
QC8 Electric Hinge
with 8-pin connectors,
6 AA batteries MUST be removed from
controller if 784 Power supply is used.
Inside
Escutcheon
Fig. 3
ElectroLynx Door Harness
with 8 & 4-pin connectors.
Harness location is
dependent on door type.
15
Remote Power and
Ground Tab
REX Connector TB2
Motor
Connector
TB1
1 2 3 4 5 6 7 8
M35
Power/Remote
Unlocking
Harness
REX Input
Connect to
Device.
Only used in
combination
with the M861
Option.
It may be left
unconnected.