mainnav MG-950d Посібник - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник для GPS mainnav MG-950d. mainnav MG-950d 13 сторінок. Sports gps datalogger
Також для mainnav MG-950d: Посібник користувача (19 сторінок)
Друкувати сторінкуA.Quick use
1.Standard package
GPS Unit +Car charger + travel charger + Li-ion Rechargeable Battery + Document CD +
Warranty Card
2.10 hours full charge is required before using (recommendation)
Fully charge the battery for at least 10 hours before using can last for 8 hours continuously
operation facilitating the low power consumption design at 66 mA .
3.Turn on the Bluetooth function in your PDA or PC
Start up MG-950d receiver for pairing before set off Bluetooth function in PDA or PC.
Moreover, check the device is equipped with Bluetooth function.
If not, you may need to acquire an optional CF or SD Bluetooth card.
4.Found a shortcut automatically in Bluetooth Manager window
The system will automatically set up quick connect device, Mainnav in Bluetooth Manager.
Further step, click the device to connect Bluetooth receiver.
5.Check the Serial Port in Bluetooth Setting and Set up correct Serial Port in your
map software
Click Serial Port to confirm the COM port after pairing with the receiver. Using PDA / PC to
pair the receiver. Start your map function and choose the right serial port and select
"Outbound COM port ". The pass word for paring is "0000".
6.Switch off the Bluetooth function
Switch off the Bluetooth function before you turn off your PDA/PC, and Switch off receiver
disconnect the GPS function.
7. GPS data logger
Turn on the MG-950d and press Power button then enter data logger recorded system, start
to record your journey. Stop the data logger function, press "Power" button, it will turn off.
Check the GPS data—Using USB cable connect MG-950d to your PC (please install
Mainnav software application), then you could view recorded data on Google Maps. For
detail instruction , please check CD file ( software instruction)
2