mainnav MG-950d Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для GPS mainnav MG-950d. mainnav MG-950d 19 сторінок. Sports gps datalogger
Також для mainnav MG-950d: Посібник (13 сторінок)
Друкувати сторінку1.Standard package
Rechargeable battery, 850mAh
Car charger: Mini USB , IP:12~24V, OP:5V 500mA
Software
Bike mounting
USB cable
Warranty card
Travel charger
2. 8 hours full charge is required before using (recommendation)
Fully charge the battery for at least 8 hours before using can last for 8 hours continuously
operation facilitating the low power consumption design at 66 mA .
3. GPS Start to get GPS signal --- when power on , the unit will automatically search GPS
signal . About 42 seconds , the GPS fixed the signal
4.Found a shortcut automatically in Bluetooth Manager window
When unit is on, the Bluetooth is on too.
The system will automatically set up quick connect device, Mainnav in Bluetooth Manager.
Further step, click the device to connect Bluetooth receiver.
5.Check the Serial Port in Bluetooth Setting and Set up correct Serial Port in your
map software
Click Serial Port to confirm the COM port after pairing with the receiver. Using PDA / PC to
pair the receiver. Start your map function and choose the right serial port and select
"Outbound COM port ". The pass word for paring is "0000".
6. GPS data logger
Turn on the MG-950d and press Power button then enter data logger recorded system, start
to record your journey. Stop the data logger function, press "Power" button, it will turn off.
Check the GPS data—Using USB cable connect MG-950d to your PC (please install
Mainnav software application), then you could view recorded data on Google Maps. For
detail instruction , please check CD ( software instruction)
A.Quick use
2