Dea 202 E Інструкції та попередження - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкції та попередження для Блок управління Dea 202 E. Dea 202 E 7 сторінок. Control board 230 v for gate automation operating

Друкувати сторінку

13. After a few seconds from arrival at respective stop, both motors will automatically stop. The "TEMPI"

led lights fixed on, operation time learning has finished. At this point press repeatedly the "SEL" key to

select any other programming function or to exit the programming (all leds are turned off).

Once the control board programming is ended, press repeatedly the "SEL" key until all leds are turned off.

At this point the control board is ready to receive commands.

9 MAINTENANCE

WARNING Any installation, maintenance or repair operation on the whole system must be carried

out exclusively by qualified personnel. All these operations must be performed only after disconnecting

the power supply, and operating in strict compliance with the electrical standards and regulations in

force in the nation of installation.

10 PRODUCT DISPOSAL

WARNING Disposal of packaging materials (such as plastic, card board, etc.) must be done ac-

cording to regulations in force locally. Do not leave plastic bags and polystyrene within the reach of

children

Demolition of this product does not cause particular dangers. Whenever the regulations in force in the

country of installation demand it, it is always advisable and necessary to dispose suitably and separately

of each material that make up the product: plastic, ferrous materials, batteries and electric parts.

11 COMPLETE CLOSING ASSEMBLY

Remember that everyone who sells and/ or automates doors/gates becomes the manufacturer of the

automated door/gate machine, and must therefore prepare and preserve a technical folder containing

the following documents (see Machinery Directives Enclosure V).

• Assembly drawing of the automated door/gate.

• Electrical connection and control circuit diagram.

• Risk analysis including: a list of the essential safety requirements provided in machine Directive

Enclosure I; a list of the risks posed by the door/gate and a description of the implemented solutions

The installer must also:

• Keep these operating instructions and the instructions for all other components in a safe place.

• Prepare the operating instructions and general safety warnings (by filling up these operating instruc-

tions) and hand a copy to the end user.

• Fill in the maintenance handbook and hand a copy to the end user.

• Draw up the EC declaration of conformity and hand a copy to the end user.

• Fill in the complete EC label or plate and apply it to the automated door/gate.

N.B. The technical folder must be kept for inspection by the competent national authorities for at least

ten years starting from the date of manufacturing of the door/gate operator.

WARNING DEA System reminds all users that the selection, positioning and installation of all ma-

terials and devices which make up the complete automation system, must comply with the European

Directives 98/37/CE (Machinery Directive), 89/336/CE and subsequent amendments (electromagnetic

compatibility), 73/23/CE and subsequent amendments (low voltage electrical equipment). In order to

ensure a suitable level of safety, besides complying with local regulations, it is advisable to comply also

with the above mentioned Directives in all extra European countries.

Operating instructions and warnings

2 0 2 E