HIKOKI WR 36DC Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент HIKOKI WR 36DC. HIKOKI WR 36DC 17 сторінок.
Друкувати сторінку
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
WR36DC: Cordless Impact Wrench
To reduce the risk of injury, user must read
instruction manual.
Direct current
V
Rated voltage
n
No-load speed
0
/min
Oscillation per minute
Bpm
Impact rate
Ordinary bolt
H
High tension bolt
Wm
Wood mode
Hm
High mode
Mm
Medium mode
Lm
Low mode
Sm
Single mode
MT
Tightening torque (Maximum)
Square drive size
Weight *
kg
Switching ON
Switching OFF
Disconnect the battery
Light section switch
Always ON (turn off after 2 minute)
Light only SW-ON
Always OFF
Clockwise rotation
Counterclockwise rotation
Remaining battery indicator switch
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
Tightening mode selector switch
Tightening mode indicator lamp
Low mode
"Light load work"
Installing pipe supports, scaff olding, etc.
Medium mode
"Light load work"
Installing pipe supports, scaff olding, etc.
High mode
"Heavy load work"
Assembling steel frames, etc.
Single mode
"Delicate work"
Tightening small diameter screws (M6 or
similar), etc.
Wood mode
"Tightening work into wood materials"
Tightening coach bolts, etc.
Warning
* Depending on attached battery. The heaviest weight is
measured with BSL36B18 (sold separately).
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 14.
Standard accessories are subject to change without notice.
APPLICATIONS
Tightening and loosening of all types of bolts and nuts, used
for securing structural items
SPECIFICATIONS
The specifi cations of this machine are listed in the Table on
page 14.
NOTE
○ Existing batteries (BSL3660/3620/3626, BSL18xx and
BSL14xx series) cannot be used with this tool.
○ Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
9