Gamber Johnson CF19 Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Док-станція Gamber Johnson CF19. Gamber Johnson CF19 7 сторінок.

Cable Ties

Cables are attached to ports on the back of the

dock. Cable ties and cable tie holders are

provided to secure the cables to the dock. Press

the cable tie holder into the mounting holes on

the dock. Insert the cable tie through the tie

holder and tighten the cable tie around the

cables as needed.

With computer installed in the dock, the Docking Indicator LED, located on the right side of the dock,

can be used as a troubleshooting tool.

GREEN: All ports are ready to use.

ORANGE: USB port and LAN port do not function, external power is not connected.

RED: PC is not supported or connection is not made.

RED (BLINKING): Error has occured in the firmware. Stop using at once and contact Panasonic

Technical Support.

NOT LIT: PC not installed or PC is OFF, Standby or Hibernation.

Vehicle Mounted Docks

CF19 vehicle docks and cradle are designed to be used with Gamber-Johnsons' motion

attachments, poles and vehicle bases.

See below for mounting dock to DS, MCS or 0-90 Clevis with (4) .25-20 x .75 long carriage bolts.

DS or MCS

CLEVIS

DOCKING INDICATOR LED

.25 Flat Washers

.25-20 Nuts

.25 Flat Washers

.25-20 Nuts

Cable Ties

.25-20 x .75 Carriage Bolt

0-90 CLEVIS

5 0F 7