Gamber Johnson 7160-0392 Інструкція з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Стелажі та підставки Gamber Johnson 7160-0392. Gamber Johnson 7160-0392 2 сторінки. Hp/canon printer mount

Друкувати сторінку

INSTALLATION INSTRUCTIONS

Product

7160-0392

HP/Canon Printer Mount

The 7160-0392 HP/Canon Printer Mount is designed to hold HP 100 & H470 printers

and Canon i100 & i90 printers.

Older model HP and Canon printers, as well as other similar sized printers, may also

fit in the printer mount.

The 7160-0392 HP/Canon Printer Mount is typically used with a Gamber-Johnson

DS-74-L mount as described below.

The Printer Mount can also be installed in other arrangements, but the installer

may need to supply longer mounting hardware and spacers.

The Gamber-Johnson 7160-0351 isolator mount can be used with the printer mount

for extra protection against shock and vibration.

A 7/16" Socket & Rachet or Wrench and a Phillips Screwdriver are needed for installation.

Side Brackets

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal in jury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Revision

Rev. A

Back Brackets

1. The 7160-0392 Printer Mount

is shipped in it's most compact

form.

Loosen nuts securing the side and

back brackets to open the printer

mount.

Form

INST-553

Printing Spec. PS-001

Side Brackets

1 / 2